PHW 300M Product Page
Complete with all RV Fittings, 50 ft. of 1" Pressure Hose, 25' power cord and electric macerator pump with 10-12 GPM capacity. The wagon has a single axle and a 300 gallon plastic tank.
Approximate weight 500 lbs.
PHW 300M Specifications
 PDF
|
|
|
Pump: |
Pump is self-priming flexible impeller with stainless steel wearplates Macerator's stainless steel cutter reduces particle size to 1/8 in. maximum Inlet port for the 3 in. slip on hose Outlet port for 50 ft. x 1 in. OD Pressure Hose |
|
Motor: |
115 Vac, single phase, 60 Hz, thermal overload protection |
|
Tank: |
300 Gallon Capacity Tank Polyethylene elliptical plastic tank for long life with approx. 1/4 in. walls Dimensions: 48 in. width | 32 in. height | 70 in. length Translucent tank to show content level Tank is supported by a steel pan on a 5 in. steel channel frame Large top lid for easy interior hose down |
|
Discharge: |
Gravity drain with 3 in. rear discharge gate valve and cap |
|
Adapters: |
RV Hose Adapter, fits all RV's |
|
Hose: |
50 ft. of 2 in. Hi Vac hose, very flexible, tough, lightweight and non-kinking |
|
Tongue: |
2 in. ball coupler Side Wind Jack with Wheel (800# maximum) |
|
Axle: |
Single axle - 3500 lbs. rating |
|
Tires: |
175/80-13" tires |
|
Weight: |
Pump and Motor: approx. 17 lbs. [Must be carried to RV] Wagon: approx. 500 lbs |
|
Warranty: |
One year warranty on trailer and tank One year warranty on pump and motor, except for wearable parts |
